Waste is not only an environmental problem, in general it is considered to be an economic loss also. However, the WASTEGONE Eco Decomposition System - developed by our tech-partner International Green Air Engineering - does not only convert in the ratio of 1/200 - 1/300 times the input volume a wide variety of solid waste into energy and renewable resources. Due to the applied innovative 'Programmed Oxygenated Plasmic State' (POPS) technology it's also self sustaining, running on atmospheric air (oxygen) only instead of electricity or fuel. And on top of that it only emits clean, non toxic air!
The decomposition process is ignited by directing a small amount of heated atmospheric air (oxygen) through the strong magnetic field created by the WASTEGONE's own magnet cores in the oxygen starved decomposition chamber.
The heated oxygen absorbed by the magnetic field not only generates the required temperatures (200 – 1200°C), at the same time highly reactive, negatively charged oxygen ions are formed. The heat inside the chamber decomposes the waste and the highly oxidative oxygen eliminates by oxidation the dioxins and other harmful compounds that are a result of the decomposition process.
The emission, which is tested according the Environmental Technology Verification (ETV) program, is then treated through a 3 fase wet scrubber and activated carbon filters to bring it well under the prescribed norms, thus complying with strict U.S. regulations
As a result of the applied plasma heat technology the WASTEGONE produces by-products that are 100% renewable. If mixed solid waste is processed the resulting ceramic ash can be used as an ingredient of concrete, tiles and bricks. And mixed with water the ash can be used for improving soil conditions. In case of non mixed solid waste containing a substantial amount of polymer products, the WASTEGONE also produces bio-sludge that can be processed into bio fuel/oil.
The green energy generated by the WASTEGONE can be stored and distributed to realize energy savings or to provide residential areas with green energy.
The WASTEGONE is not only available in a wide range of waste processing capacities, the maintenance costs are minimal and it doesn't require highly skilled operators. This solution is therefore affordable to smaller organizations with limited budgets and human resources. To meet an increasing processing demand the capacity can be up scaled easily by putting more units in line. And due to its compact design the WASTEGONE can be relocated easily.
The PLC operated WASTEGONE comes in a range of models. The T2 is capable of processing 2 tons of solid waste per 24 hours. The capacity increases accordingly with the T5, T10, T20, T40, T60, T80 and the T100. The T2 generates max 10kW per hour. The T100 however delivers max 1MW per hour!
